POINTS FORTS
- New modern and simple design with patent protection.
- Super bright, professional lighting distribution with 120°*60° angle, achieving much larger lighting area.
- The specific optical lens makes the output lighting uniform and comfortable.
- The solar panel is 170° adjustable for maximum solar charging flexibility.
- The lamp holder is 360° adjustable to easily define the desired lighting direction and area.
- Optional operation modes by remote control, customized lighting duration and brightness for diversified use.
- Grade A monocrystalline solar panel with laminated glass, large size, 21%+ high conversion for faster charging, 20 years+ lifespan.
- Latest generation LiFePO4 battery of high quality with large capacity, 2000 cycles, with overcharge protection, safe and durable.
- LG brand ABS+PC housing, anti-UV, fireproof, safety guaranteed.
- 5 meters long connection cable with IP67 waterproof connector, strong and durable.
- IP65 waterproof.
MULTIFUNCTION REMOTE CONTROL
OPERATING MODE
Please press the lamp button first, the lamp will automatically turn on and enter the auto-sensing mode, and the remote control will be activated at the same time.
Then please use the remote control to set the desired working mode.
AUTOMATIC DETECTION MODE
When the battery power is greater than 30%:
The light automatically turns on at night and switches to full brightness when motion is detected within the 8 meter detection zone, then switches to a lower brightness after 60 seconds of no motion.
When the battery power is less than 30%:
The light automatically turns on at night and switches to full brightness when motion is detected within the 8 meter detection zone, then turns off after 60 seconds of no motion.
INSTALLATION
Prepare the lamp, accessories and tools well, confirm the installation location and wire length.
① Drill 2 holes of Φ8mm with a depth of 60mm and a spacing of 83.5mm on the wall, fix the lamp on the wall with expansion anchors and screws.
② Drill 2 holes of Φ8mm with a depth of 60mm and a spacing of 130mm on the wall, fix the solar panel to the wall using expansion plugs and screws.
③ Connect the solar panel wire to the lamp and screw it tightly.
④ Press the button on the lamp to activate the remote control, and then use the remote control to set the desired working mode.
APPLICATION
Thank you for your message.
Our team will get back to you very quickly.
Oops! An error occurred while sending the message.
Please try again later.